• Solutions
  • By Industry
    • Distribution
    • Financial Services
    • Gaming
    • Government
    • Healthcare
    • Manufacturing
    • Media & Entertainment
    • Travel, Transportation & Logistics
  • By IT Need
    • Proactively Prevent Downtime
    • Protect Data for Compliance
    • Achieve Disaster Resilience
    • Reduce CAPEX & OPEX
    • Provide HA in Remote Locations
  • Small & Medium Business Solutions
  • Windows Business Application Availability
    • BlackBerry HA
    • Exchange HA
    • SharePoint HA
    • SQL HA
    • XenApp HA
    • BlackBerry DR
    • Exchange DR
    • SharePoint DR
    • SQL DR
    • Virtual Server DR
• Products
  • Overview
  • everRun 2G
  • everRun VM for XenServer
  • everRun DR
  • everRun SplitSite
  • everRun HA & FT
  • everRun Advantage
  • Product FAQs
• Services
  • everRun Services Overview
  • Consulting Services
  • Training Services
    • Course Schedule
    • Course Registration
  • Assurance Program
  • Customer Portal
  • Requesting Technical Support
  • Technical Community Login
  • everRun Assist Web Support
• Partners
  • Partners Overview
  • Citrix Alliance
  • Microsoft Alliance
  • Why Resell Marathon
  • Partner Program FAQs
  • Find A Reseller
  • Partner Login
• Resources
  • Resource Center
  • White Papers
  • Webinar Recordings
  • ROI Calculator
  • Collateral
  • Flash Demos
  • Customer Endorsements
  • Success Stories
  • Product Reviews
  • Analyst Opinions
  • Exporting everRun Products
• News & Events
  • Latest News
  • Press Releases
  • In The News
  • Events & Webinars
• About Us
  • Overview
  • Why Marathon
  • Executive Team
  • Board of Directors
  • Awards
  • Careers
    • Current Openings
    • Benefits
  • Corporate Offices
  • Contact Us

Blog

iX Magazin, a leading IT publication based in Germany, recently published an in-depth product comparison review of VMware’s vSphere 4 FT vs. Citrix XenServer with everRun VM in their September 2009 issue. In his article, “Fehlertolerante Systeme” or fault tolerant systems, reviewer Jörg Riether noted everRun’s ease of installation and intuitive setup process. Here’s a couple of additional highlights from the review:

“everRun has a very transparent way of handling the sudden total failure of a node without noticeable interruptions – this is true from the perspective of the administrator and from the viewpoint of the user working on the protected server. The Level 3 protected VM goes on running through each active application without any loss of performance. If the server is switched on again after being disconnected from the mains, everRun re-integrates it immediately and starts synchronization.

One of the fundamental advantages of everRun is demonstrated here: it doesn't require a data memory shared by both hosts. Marathon is able to replicate any virtual hard disks from one Xen host on the other and keep them synchronized. This eliminates the effort required for a SAN with synchronous mirroring and redundant paths as everRun itself includes the technology.”

To read the entire product review article (in English!), you can download the PDF here.

Thanks again to those who joined us for last week’s webinar, “How to Get at Least 2x Greater Cost Savings from Server Virtualization.” An on-demand recording is available to watch at your convenience (just click the link.)

We had a lot of good questions from our attendees during the Q&A portion of the webinar, which are summarized below.

How does everRun synchronize and how often?
everRun synchronizes as the data is written to the virtual machine. It’s not done on a time stamp. It is synchronously written to both physical hosts. We do a bit check to make sure both sides are written prior to responding back to the application, stating that it has been written, so that the data is always in a constant state and there is no data loss.

If I already have XenServer installed, can I install everRun on top of it, or do I need to reinstall XenServer?
everRun can be installed into existing XenServer environment. We do have resource pool requirements, so as long as you in a resource pool or can join yourself to a resource pool with a second server, or multiple servers for multiple host pools, we can be installed into an existing XenServer environment.

How does it support local storage? If the server that is hosting the storage goes down, what happens?
We mirror the virtual machine across two servers, so there are two copies of your virtual machine. Where we sit in dom0 (Xen domain zero), we have filter drivers sensing that type of situation. When using Level 2 protection with everRun, if you lose local storage, we leverage the copy of the info on the second server for zero downtime. If you were to lose the entire server, it would failover to the other side and start in Windows services. In Level 3, the same procedure applies to local storage. If you were to lose the entire server with Level 3, everRun allows it to simply continue functioning because we are running active-active.

Have you used this with a building automation system, such as Andover Controls Continuum which runs on a SQL Server?
We have a very large building automation practice here at Marathon and have worked with all flavors of SQL server. We have been working for years with building automation and security companies such as Johnson Controls, Tyco, Andover Controls, Siemens and many others. As long as the building system runs in Windows Server 2003 or 2008, we can provide availability for it with no custom scripts or custom coding.

What's the overhead with regards to CPU, memory, disk space of the host?
Generally in the 3-5% range. We’ve done some performance testing on XenApp and Exchange. You can download the results papers here:
• Understanding and Characterizing Performance Implications for Running Exchange 2007 with everRun
• XenApp 5.0 High Availability Performance

Can everRun be used with homegrown or custom applications?
Yes. everRun is completely transparent to the application and can support any and all Windows applications without any modifications, customizations, or scripting.

Can everRun protect a workload that is physical on one side and virtual on the other?
We do not support P2V today, but we have an ongoing research project on this topic. You can contact your sales rep for more info.

What is the maximum number of workloads that can be run using everRun?
The best way to answer this is to look at your virtualization planning assessment, including power capacity planning and hardware capacity planning. If you can support 10 virtual machines on a server, then you can support 10 virtual machines protected by everRun on that server with no problem. We also require a similar machine as the secondary server running on the same resource pool. It really comes down to how much your hardware capacity can handle.

How to take care of software corruption?
Because we are a synchronously written high availability solution, if there is software corruption on one side, we are going to replicate it to the other side. We sit at an asynchronous block-level filter driver location, so we have no ties to the software. So if it corrupts, it will corrupt on both sides.

Are you currently developing for Exchange 2010?
Yes, everRun will support Exchange 2010.

Does everRun support Small Business Server?
Yes we do. We’ve tested and qualified it for 32-bit and 64-bit versions of Windows Server 2003 Small Business Server Edition.

Does everRun replicate all server data including application data like a SQL database?
Yes. We replicate synchronously at a block level. We sit inside dom0. We then send the info block level to the other side. We do a block check and then we check our bit map to make sure the blocks are synchronously written on ongoing basis.

Can everRun be installed on top of XenServer 5.5 ?
Yes. We will support 5.5 in our next release scheduled for September.

Can we achieve DR?
Marathon offers a couple of options for disaster recovery (DR). Our SplitSite product can be used for metropolitan/campus DR, up to 150 miles apart, depending on your network conditions. We also offer everRun DR, for DR sites that are more than 150 miles apart.

Is the disk mirroring full copy or delta?
Upon initial protection we do a full copy. After you have a failure, such as an iSCSI card failure, we will do a delta copy back over to what’s missing. If you lose the entire RAID set, then we will need to do a full copy again.

Is the price of implementation based on the server capacity?
You need to purchase a license for each server in the pool. In terms of virtual machines (VMs), the license covers as many VMs as you can support in a box.

Our July 30th webinar “Top 10 Reasons to Upgrade to Windows Server 2008 Now” was very well attended, and as expected, generated a lot of good questions. So many questions, in fact, that we weren’t able to answer them all during the live Q&A portion of the webinar.

For your convenience, we’ve captured all of the questions below. Answers have been provided by our speakers, David Hanna, Infrastructure Architect at Microsoft, and Michael Bilancieri, Senior Director of Products at Marathon. The questions are grouped by topic, starting with Windows Server related questions and then Marathon everRun related questions following after.

How seamless is the migration from Windows Server 2003 to 2008?
It really depends on the workload. Active Directory upgrade is similar to the 2000 to 2003 upgrade, and should not be disruptive. Cluster migrations require a rebuild of the cluster. For IIS, many applications can be migrated easily. It’s best to look on Microsoft.com for migration info that is specific to your workload. Simply introducing a Windows Server 2008 server into a 2003 environment should be seamless.

Going from Windows Server 2003 to 2008, do you recommend upgrading or re-installing the operating system?
Microsoft supports an upgrade of the OS only – no applications. Most customers however, choose to reinstall with Windows Server.

What are the hardware requirements for this Windows Server 2008?
Minimum is a 1ghz processor, 512mb of RAM, and 20GB of disk space. Details can be found here: http://www.microsoft.com/windowsserver2008/en/us/system-requirements.aspx

Do you have an actual laboratory so that I can practice Windows Server 2008?
You can find the TechNet Virtual Labs here: http://technet.microsoft.com/en-us/virtuallabs/bb512925.aspx

Any difficulties adding a Windows 2008 Server into a 2003 domain? Anything to watch out for?
Adding Windows Server 2008 Member servers to the domain should not be an issue. There are no special things to watch out for, until you start adding Domain controllers. Note that if you add a 2008 member server, and do not extend the schema, some things will be unavailable, like the enhanced DFS capabilities in 2008.

Where can I get a copy of the Windows Server 2008 trial version?
You can obtain the trial version here: http://www.microsoft.com/windowsserver2008/en/us/try-it.aspx. Starting August 20th, you will be able to get R2 in the same location.

Can I do in-place upgrade AD server 2003R2 to Server 2008 without any problem? Also, can I do that same thing with Exchange 2007 server on SRV2003R2?
Microsoft only supports the upgrade of the Operating System from 2003 to 2008. We do not support the upgrade of Windows Server 2003 with applications, so the Exchange 2007 upgrade would not be supported.

Is it possible to use the same imaging deployment method for Windows 2008 physical and virtual machines (in VMware) for consistent builds?
It is possible to use traditional imaging methods for physical and virtual, however in the virtual environment, most customers tend to use template Virtual Hard disks to deploy systems, as it is faster and more flexible than imaging.

What is the difference between GPO and NAP?
Group policy is a part of Active Directory that allows for management of users and computers. NAP, or network access protection provides endpoint health checking for network clients. This integrates with network components to restrict or allow network access. Client NAP configurations can be controlled by GPO, and some GPO settings can be enforced by NAP.

Does NAP work for VPN connections as well?
Yes. It is integrated with Microsoft VPN as well as some partner solutions.

Does XP pro and 2008 Server talk well together? What’s a better path, upgrade your clients to Win7 then servers to 2008? Or vice versa?
XP will work in a 2008 domain environment, but it won’t be able to take advantage of all of the features of 2008. Vista is designed to complement 2008, and Windows 7 works best with 2008 R2 (or 2008). I would recommend deploying Windows Server 2008 for workloads that will gain the most benefit – this will allow you take advantage of it immediately. Then follow with Windows 7 when you are ready.

Do terminal servers have central management to manage users and applications?
There are a number of tools to centrally manage the environment. R2 adds a connection broker component that will publish apps from multiple servers. However, apps still need to be published on each server, and permissions need to be set that way as well. Citrix provides some great centralized mgmt tools that enhance the native tools.

Will 2008 support XP clients?
Yes. 2008 will support XP for many things including Terminal Services, with RDP 6.1 client, NAP, with XP Sp3, Group policy preferences and many other features. Windows Vista and Windows 7 however, are able to take advantage of more features.

I have two Windows 2008 servers that are going to be setup as a cluster for Exchange 2007. Is there a document for setting up the “heartbeat” connection between the two servers?
There are many documents on technet that will help. When you build the cluster, the validation wizard will check the configuration of the heartbeat network to make sure its configured appropriately. Typically, a 2 node cluster will use a cross-over cable, although a non-routed VLAN on a switch also works. Some docs:

Step-by-step guide for basic 2-node cluster: http://technet.microsoft.com/en-us/library/cc731844(WS.10).aspx
Validating an Exchange 2007 Cluster: http://technet.microsoft.com/en-us/library/bb676379.aspx

Is Server 2008 with Exchange supported on VMware?
Exchange Server 2007 SP1 on Windows 2008 is supported – see here for details: http://www.windowsservercatalog.com/svvp.aspx?svvppage=svvp.htm

Is it possible to run a 2008 DC with 2003 DCs without any sort of hacks or work-arounds?
Yes – it is possible. You’ll need to extend the AD Schema and install a 2008 member server, then promote it to a DC. There are some documents here: https://blogs.msdn.com/canberrapfe/archive/2009/04/08/adding-a-2008-domain-controller-to-your-2003-forest.aspx

Regarding the NAP, once a client is quarantined, is there a policy or rule that the admin must create to get the client healthy? Meaning, is it automatic or does the client sit there until someone checks the quarantined clients and fixes the issues?
NAP can be configured to auto-remediate certain things – turning firewall on, turning on autoupdate, etc. For AV, or patches, users can be directed to a web page with simple instructions or links to update the client.

Has load balancing improved with 2008 and TS?
It has been made simpler. Many customers found NLB to be complicated for what was needed on Terminal Services. TS on 2008 uses DNS round robin for initial connection with the TS Farm, then load balancing across nodes is handled by using RDP session load balancing.

How many CALs are included in the bundle of Windows Server 2008?
There are different bundles with 5, 10, or 25 CALS. http://www.microsoft.com/windowsserver2008/en/us/pricing.aspx

How many machines can run on a single user MS Windows Server 2008, because we want to move to VMware soon.
Microsoft supports up to 192 VMs on Windows Server 2008, and 384 on Windows Server 2008 R2. Typically numbers will not be anywhere near this, as other system resources will bottleneck. Details can be found here: http://www.microsoft.com/windowsserver2008/en/us/hyperv-faq.aspx#HyperVWindowsServer2008Specific

Is MS Windows Server 2008 VMware built-in?
Microsoft’s virtualization solution, Hyper-V, is built in to Windows Server 2008 and R2.

How would Hyper-V handle the VMware over committing resources, for example, is ESX server only have 8GB RAM but it can assign 16GB RAM to the VMs because it holds the memory and only releases it when it is required. The main reason for Exchange on a ESX box is not a good idea.
Hyper-V does not support over-commit of memory resources. To assign 8gb of RAM to a VM, you must have 8gb available. This improves performance and security.

What happens when a file which has been transferred/shared to a branch using Branch Cache is opened in the main office? Will the branch be informed about this and vice versa?
When clients use branch cache, each file is referenced by a hash. When a client tries to retrieve a file from the central office, it checks the hash of the file, then compares it to what is in the local cache. If the file has changed, then the hash would have changed, and the client would retrieve the updated version. The branch is not informed if the central copy is opened, only if it is changed, through the hash mechanism.

What is the maximum supported DFS server in 2008? In 2003 I think it is less than 70GB and that was not enough for me.
The File Replication Service in Windows Server 2003 had trouble with replication when data sizes got too big. Windows Server 2008 uses DFS-R (Distributed File System Replication) for replication – this uses an algorithm call Remote Differential Compression, which compresses files, and replicates only changes. This makes replication more efficient, an able to support large volumes of data. The limits that existed in 2003 for data size are either removed, or raised greatly.

What is the standard vs. reduced footprint for Windows 2008?
Processor requirements for Server Core and full Windows Server 2008 are the same. Minimum memory recommendations of 512mb are also the same. While the system requirements on Microsoft.com don’t list separate requirements for Server Core, it typically requires less disk space than a full installation. Additionally, Server Core has fewer roles to install (only 9), fewer services running, and has no GUI.

Are there any plans to integrate snapshot technology within Hyper-V?
Hyper-V already supports snapshots at two levels. First, it supports snapshots of the Virtual Machine itself, through use of memory copies and differential disks. The other snapshot capability is a snapshot backup, performed by the host Hyper-V system, using Volume Shadowcopy Services to back up the running VMs.

When will Hyper-V R2 be released?
Windows Server 2008 R2 and Hyper-V R2 released to manufacturing on July 22nd. General Availability will be in October. Volume license customers should have access to the code on August 19th. More details are available here: http://blogs.technet.com/windowsserver/archive/2009/07/22/when-to-expect-windows-server-2008-r2-rtm.aspx

Can everRun protect a workload that is physical on one side and virtual on the other?
everRun does not install INTO a Windows system, so it isn’t able to protect a ‘physical’ system in this sense. Many of our customers choose to keep some of their applications isolated to a physical server with no other applications or VMs on that host while protecting them with everRun. This is done by creating a single Windows environment within the everRun environment. Although the capability is there to create multiple, a single is the desired approach.

How does everRun handle data stored on NAS?
everRun can use any product data that resides on any type of storage. everRun sees the storage repository as a disk volume and can mirror between any two.

How many licenses for the operating system do I need for this solution? Do I need two licenses for the application (i.e. Exchange) as well?
Typically two licenses of Windows are required, however the Enterprise edition provides benefits when running in virtual environments. Please check with Microsoft on this and with your application vendors as all vendors have different licensing terms for redundant/high availability systems.

How well does everRun work with dissimilar hardware (i.e. at the DR site using older servers)?
There are some requirements for similar server components. If two supported servers are utilized and one happens to have a slower processor, the application may run at the slower speed, depending on the level of protection chosen within everRun.

Does everRun replicate all server data including application data like SQL databases?
Yes. The entire operating environment and all disks, including the OS, application, and application data are mirrored.

Is everRun effective for small companies? For example, an Exchange environment for less than 200 users?
Absolutely. Many of our customers are smaller to mid-sized businesses who require an availability solution that is simple, effective, and doesn’t require SAN storage or dedicated IT staff to manage.

Does everRun support MS Small Business Server?
Yes. Our everRun solution will work with any version of Windows Server, 64-bit or 32-bit. We work for small scale solutions all the way up to enterprises.

Will everRun support Exchange 2010 DAG location geographically?
We are still researching Exchange 2010 capabilities and how they can best be supported by everRun. At this time we are not yet clear on how DAG will or can be supported.

How are system upgrades handled in the everRun environment?
A single upgrade is performed on the single exposed Windows environment. Both of the redundant systems will be updated automatically by everRun. everRun also offers mechanisms to reduce the risk and associated downtime of system upgrades.

How does the actual SQL server app run in the everRun environment?
Exactly the same as it does in a non-everRun environment. everRun sits below the Windows environment therefore there are no application changes required.

The everRun software sounds great, but it requires two physical servers. Any hope of moving forward to do the same work within a VMware or Hyper-V environment?
Today everRun supports virtualized environments running on Citrix XenServer. We announced a joint development agreement with Microsoft back in early 2009 to provide everRun Fault Tolerance within a future version of Windows/Hyper-V.

How is everRun migrated with Windows 2008 hypervisor?
everRun will support a future Windows/Hyper-V release as part of the joint development effort between Microsoft and Marathon.

What system resources are used by everRun?
A small (varies a bit by the application that is running) bit of CPU and memory overhead is consumed by everRun.
 

Bhumik Patel of Citrix has posted Part II of the Citrix and Marathon demo at SAP on his blog. Part I of Bhumik’s blog series looked at specific details on Citrix Delivery Center and the Disaster Recovery demonstration for SAP NetWeaver.

Part II covers different high availability solutions also demonstrated at SAP. In addition to this blog series, a Reference Architecture document provides all the technical details about Citrix and Marathon solutions implemented for SAP. When looking for an HA solution, various factors such as application criticality and business impact must be considered before choosing a particular solution for an application. A more detailed report on determining availability requirements can be found here.

The following video from Citrix features the Marathon everRun VM Level 3 High Availability solution demonstrated at SAP Co-Innovation Labs in Palo Alto.

We had a lot of great questions during the Q & A session of our February webinar with Stephanie Balaouras of Forrester Research. We’ve posted the questions and responses here on our blog for everyone’s benefit.

Questions from the webinar:

Q: In the architecture two "mirrored" VMs are shown which are connected. Does that mean that you have to install 2 application VM servers or do you have to install just one and Marathon makes the second?
A: You only need to create one application VM. After this is created, you can use everRun to protect that application. As part of the protection process, everRun creates a “cloned” instance of the application on the second host. The instance is completely identical to the original, with the same identity, MAC address, resources, etc. It is this redundancy created by everRun that protects the applications.

Q: In the Marathon license there is HA and FT. In which are the levels 1-2-3 available?
A: Levels 1, 2, and 3 are available in a single solution called everRun VM and any level of protection can be enabled on a VM. everRun VM level 3 protection will be available in Q2.

Q: The licensing question you just answered seems different from what you used previously. You previously only had to license the VMs OS in a fully protected system. Please explain.
A: Microsoft licensing requires a valid Windows license for each side of the protected VM. Using Enterprise Edition can reduce the number of licenses required. Please refer to Microsoft licensing terms for specific details for your environment.

Q: How does the software communicate between disparate storage NAS to DAS, SATA to Fibre Channel?
A: everRun does not limit you to needing matching storage requirements on multiple hosts. Communication between hosts is done through Availability Links (A-Links), which are private networks between each host. everRun handles the mirroring at the host level, passing I/O through XenServer to write to the disks. The type of disk or connection is not relevant.

Q: How does this compare to VMWare's SRM & VDM products?
A: VMware SRM provides a mechanism to restart a VM on an alternate host, however it relies on other storage mirroring solutions (often within the storage system) to perform the mirroring. SRM does not move data or provide a comprehensive HA or FT solution.

Q: Is the product host based or a fabric based solution?
A: everRun VM is a host based solution, with a minimum of 2 hosts required.

Q: Do you need to keep a warm copy of the applications at the DR site?
A: During the protection process, everRun takes the chosen VM and clones it to the designate secondary host. This creates a complete and identical instance on the secondary host. everRun maintains these two synchronously so that they are always identical. everRun’s unique architecture exposes these two mirrored instances as a single entity; there is no need to install, manage, or update both sides, only the one single instance of the OS/application. Should the entire ‘primary’ host fail, the ‘secondary’ host will immediately start the cloned version. It comes up with the same IP address, hostname, and MAC address of the primary so that there are no client-side, DNS, Active Directory, or other infrastructure changes required.

Q: Is the DATA synchronous like SRDF or near synchronous?
A: everRun performs synchronous mirroring of the entire Windows environment, including the OS, application, and data.

Q: How does this compare to products like RecoverPoint/Replistore, InMage, Neverfail, Falconstor etc?
A: These products are disaster recovery products intended for long-distant asynchronous data replication and failover. everRun availability solutions provide true availability in a comprehensive and automated manner. Marathon also offers DR solutions for long-distant protection. Disaster recovery and availability are mutually exclusive in most cases and should generally be considered separately. They are complimentary more than competing solutions.

Q: What is the software support plan? What are the recurring costs for your product year to year?
A: We offer a Premier support plan or a Basic support plan. The only recurring cost year to year is the cost of support.

Q: What are the operating system requirements, how many copies of the OS do you need?
A: Each Windows environment is mirrored to a secondary host, requiring a second Windows license. Using Enterprise Edition of Windows allows for fewer licensed copies. Please refer to your Windows licensing terms for specific requirements.

Q: Regarding the 10ms sync time, what happens if that time increases to say 20ms due to network traffic?
A: If the latency increases beyond our requirement the paired systems may assume that one system is down and redundancy may be lost. In a properly configured environment the application should remain running while the secondary system is no longer maintained in a redundant fashion. Once the latency returns to within spec, the systems will re-sync automatically and return to a fully redundant state. Typically the application is not impacted.

Q: What are the bandwidth requirements?
A: Best practices state 155MB link between the two hosts. For local systems a simple crossover cable between the two systems is sufficient. When separating the systems the 155MB requirement becomes more relevant. This number can vary depending on the applications being protected and the amount of data being managed.

Q: Do you have instances of numerous geo-available solutions with specific applications?
A: Here are two examples:
MAN AG success story with everRun SplitSite
Chester County, PA success story with SplitSite

Q: Is windows Server 2008 VM supported? If not, why?
A: Windows Server 2008 64-bit will be supported in Q2 of this year.

We had a lot of great questions during the Q & A session of our January webinar with one of our customers. We’ve posted the questions and responses here on our blog for everyone’s benefit.

Questions for The Sullivan Group:

Q: Which everRun product are they running? everRun HA or FT?
A: everRun VM

Q: How did you migrate your VMware VMs to XenServer?
A: We used a V2V software migration tool from Visioncore that worked really well.

Q: What was the procedure when bringing back up one of the servers when the RAID card failed. How easy was it?
A: It couldn’t have been easier. Once we repaired the failed component, everRun identified it and put it back into use. everRun used a mirror copy to bring the two systems back in complete synchronization. This all happened without our intervention and without impacting our users.

Q: Was a short implementation time a demand from The Sullivan Group, and what was the expectations before the implementation?
A: Short implementation time wasn’t a hard requirement. We expected the implementation to take a couple of weeks and were pleasantly surprised when we had it all up and running in a little less than a week.

Questions for Marathon:

Q: Is there a special license for SQL? Or any other special considerations?
A: Special licensing for the applications you protect is not required. You should refer to the SQL license agreement or the agreement for the application on the VM that you are protecting. With everRun, only one instance of the application is running at any one time.

Q: Is this active active or active passive?
A: We refer to it as ‘active/ready’. The secondary VM is in a paused state, however disk and network I/O are being processed. This allows everRun to deliver fault tolerance at the component level, while immediately starting the paused VM fully in the event of a full host failure on the primary side.

Q: Do you have to install everRun prior to your application, so if I already have an application installed would I need to rebuild the production server? IF so does this change the install time and impact?
A: Assuming you have a VM set up on a host, the application can be installed before or after the VM is protected with everRun. The protection process does require the VM to be shutdown prior to beginning the protect process, however the process takes about 2 minutes to complete after which time the VM can be restarted.

Q: How does everRun handle Software or OS hangs?
A: everRun does not monitor applications.

Q: In your opinion what is the strongest difference between this and MS Clustering?
A: MS Clustering can be a nice fit, especially with applications such as SQL Server. One of the requirements for MSCS is shared storage, or a SAN. This requirement can push the cost out of reach for many small and midsized businesses. everRun does not require shared storage and can utilize any type of storage the customer may have or intend to purchase. In addition, everRun provides fault tolerance and not just failover restart. This helps to minimize interruptions typically caused by failed devices.

Q: Does everRun VM support Windows x64 architecture on VM?
A: Yes, everRun and XenServer support 64-bit hardware and software.

Q: Can VM run Windows 2008 x64? Or Windows 2003 x64?
A: Citrix XenServer supports VMs running Windows 2008 64-bit and Windows 2003 64-bit. Currently everRun VM can protect VM’s running Windows Server 2003, 32-bit and 64-bit. Our next release planned for calendar Q2 09 will support Windows Server 2008 32-bit and 64-bit VM’s.

Q: How much overhead do you have when you protect a VM?
A: When protecting a VM you are able to define how much of a particular resource is to be utilized and reserved. This helps to reduce the amount of resources required for protecting VM’s. Performance overhead can vary depending on if it is I/O heavy, CPU heavy, what the application is, etc. Typically however performance overhead is not impactful.

Q: Is everRun tied to a VM on a particular physical XenServer, what would happen if you used XenServer technology to move to another physical server?
A: Once a VM is protected with everRun, it is hard-configured to two physical hosts. everRun allows online migration of the active VM between these two hosts without interruption. To move one or both VM’s in the protected pair to a different host would require it to be unprotected, migrated if necessary, and protected again with the new host.

Q: Please speak about XenServer integration, process for failover to DR site?
A: everRun has a tight integration with XenServer. everRun is installed on top of XenServer and is completely compatible and able to protect Windows VMs created in XenCenter. During the protection process, everRun takes the chosen VM and clones it to the designate secondary host. This creates a complete and identical VM on the secondary host. everRun maintains these two VM synchronously so that they are always identical. everRun’s unique architecture exposes these two mirrored VM’s as a single VM; there is no need to install, manage, or update both sides, only the one single instance of the OS/application. Should the entire ‘primary’ host fail, the ‘secondary’ host will immediately start the cloned VM. It comes up with the same IP address, hostname, and MAC address of the primary so that there are no client-side, DNS, Active Directory, or other infrastructure changes required.

Q: Will everRun run on x64?
A: Yes, it requires 64-bit servers.

Q: I assume the servers must match i.e. memory, HD space and memory as well as other array controllers and type of arrays?
A: The only requirement for similarities within the servers is same family of processors. everRun can mirror storage between dissimilar storage types and vendors, allowing lower-cost storage to be deployed on the ‘secondary’ host.

Q: Is everRun for virtual servers XenServer specific, or does it work with Hyper-V, Virtual Iron, etc.?
A: Today everRun is developed for XenServer. In January we announced a development and marketing agreement with Microsoft, we will be developing an everRun product for Hyper-V as well.

Q: What if the server is up but a single app on the server fails? Also, how do you detect the app failed?
A: everRun does not monitor applications. However if by ‘single app’ you mean a single VM, everRun does protect at the individual VM level. If a VM fails yet the host and other VM’s remain alive, everRun can restart the VM on the secondary host.

Q: Do you have to purchase redundant licenses for the applications that you have replication as Virtual Machines across two physical servers? For example, do you have to purchase double the Exchange licenses to do it or just the licenses as if you had a single server?
A: You would need to refer to the license agreement for each application. With everRun, the application is running as a single instance and many vendors don’t require two licenses, but this varies between vendors.

Q: Can you have full fault tolerance on XenApp servers between 2 datacenters, where users would not be disconnected from their session if a failover occurred?
A: everRun can certainly protect XenApp as it can protect any Windows application. A number of customers are using everRun to protect XenApp today. The ability to separate between data centers (there are latency requirements due the synchronous nature of everRun) will be available in Q2. To prevent session disconnects will require Level 3 protection, or full System-Level Fault Tolerance, which will also be available for everRun VM in Q2.

Q: Can the VM servers be in different data centers across a WAN behind firewalls?
A: The ability to separate servers geographically will be available in Q2.

Q: Are there general guidelines on the number of VM's that can be protected between two host machines? I'm thinking of SQL Server systems hosting highly transactional databases.
A: The answer to this is dependent on the applications running within the VM’s, hardware, and activity within them, so providing a set number of VM’s would not be practical. Please contact Marathon if you would like to discuss your environment to better understand what VM limits may be suitable.

Q: How can you use the USB interface, for example when software requires a dongle?
A: everRun does not redirect the USB interface to a protected VM.

For healthcare organizations and their IT departments, almost everything is mission critical, from patient information to registration systems and records management. Information needs to be readily available and data has to protected at all times to avoid compliance risk or calamitous consequences.

From what we’ve seen, the interest in virtualization for high availability and disaster recovery is driven by two key factors: cost savings and greater demand for 24x7 availability of health records. Like so many organizations in this tough economy, health care providers are under tremendous pressure to deliver the same quality services at lower cost. Using server virtualization for server consolidation can help. And the VMotion and XenMotion capability in VMware and XenServer respectively can provide these organizations with DR that is significantly easier to deploy and execute. On top of XenServer they can add everRun VM for fault tolerant, high availability protection that is much more affordable and practical than what they have had in the past.

Testament of the increased interest in virtualization from healthcare organizations comes from our own experiences here at Marathon. We’ve seen a positive uptake in healthcare customers who are deploying everRun VM to protect their virtual environments. Currently, about 30% of new customers that are in Marathon’s pipeline for sales are in the healthcare related space. We can only assume that the number of healthcare customers we service will continue to grow as we venture into 2009.

The changes these organizations are making are allowing them to stay ahead of the competition as they increase efficiency, ensure the availability of patient records and most importantly set the standard for inpatient and outpatient care.

Are you part of a healthcare organization that is starting to deploy server virtualization? Is more effective HA and DR a key goal?

Using the Adobe Flex framework, Marathon teamed with UI Foundry to develop a rich Internet application (RIA) console that manages and monitors the world’s first fault-tolerant, high availability software (everRun VM) for server virtualization. The software integrates with Citrix XenServer environments, all through one-click operation.

“The value proposition of using Adobe Flex lies in how we cost-effectively built a rich, elegant user interface that consolidates and simplifies huge amounts of data across complex server environments – positioning our product line even further ahead of the product curve.”- Jerry Melnick, CTO, Marathon

See the complete case study on Adobe’s site here.

As many of you know, one of the key components of everRun VM is the ability to dial up or dial down the level of availability needed to protect business-critical applications. With buzz surrounding the release of Citrix’ XenServer 5, we have been approached with questions like “what should I use to protect my low-priority applications” and “how do I know when something should or shouldn’t be protected with the lockstep option?” To help explain the three levels of availability and when they would be used, we’ve put together these tips:

LEVEL 1: BASIC FAILOVER WITH XENSERVER HA
The first level of availability, basic failover and recovery, is appropriate for applications where recovery is not absolutely critical, and where manual intervention, while not desirable, is acceptable. These may include infrastructure applications or dev and test systems.
XenServer HA provides:

LEVEL 2: COMPONENT-LEVEL FAULT TOLERANCE WITH everRun VM
For applications with business-critical roles, everRun VM provides component-level fault tolerance: the ability to withstand the loss of an individual network or storage component without interruption or downtime.
The attributes of Level-2 availability include:

LEVEL 3: SYSTEM-LEVEL FAULT TOLERANCE WITH everRun VM AND LOCKSTEP OPTION
For the most mission-critical systems, Marathon everRun VM with Lockstep Option provides system-level fault tolerance, with continuous availability in the face of component or system-wide failures. Level 3 will be available in 2009 and offers protection for systems that cannot experience any downtime and must maintain transaction state at all costs. everRun VM with Lockstep Option offers all of the benefits of everRun VM (Level 2), together with:

For more information on the different levels of availability please visit here.

Citrix Summit is a major event for Citrix partners to learn the best new technology products for application delivery infrastructure solutions. The event was a few weeks ago, and it is worth noting that in the keynote presentation, delivered by Mark Templeton, President and CEO, and Peter Blum, Senior Systems Engineering Manager, they demonstrated Marathon’s everRun VM Level 3 protecting XenApp. What the audience saw was how everRun provided continuous availability for XenApp – even when they unplugged one of the servers.

Did anyone have a chance to see this demo live? What did you think?

Yesterday, Matt Fairbanks, VP Product Marketing, Citrix, and Jerry Melnick, CTO, Marathon, presented the webinar “Virtualizing Exchange – The Cold, Hard Numbers on Why Citrix XenServer + everRun VM is the Best Platform.” Below are a few of the questions asked from participants with Jerry’s response to each:

Q: What happens in a case of a split brain scenario?

Jerry: In our SplitSite products, we have what we call a quorum services capability – it’s actually an additional component that’s added on to manage split brain and arbitrate when you lose all connections between the two machines.

Q: How long does it generally take to set up XenServer with everRun VM to create this kind of a solution?

Jerry: Citrix people have always mentioned “Ten minutes to Xen” which is a pretty good rule of thumb. We say it’s another ten minutes to add the Marathon software. It’s a simple script that gets run on each host, and then you’re off and ready to protect the machines. The actual protection process itself is really a matter of a minute. The simplicity and ease have never been seen before in this industry with this class of availability solution.

Q: In field of limitations and customers that have deployed this kind of technology, are there any things you would council people to consider to set up XenServer and everRun in the most highly available and robust way?

Jerry: With our system, we provide best practice guidelines for configuring networks availability, etc. One of the beauties of our technology – working in conjunction with XenServer – is that once everything is installed and running, we put everything into an active validation mode so that we know components are configured properly. If something is misconfigured or isn’t running redundantly, you’re going to see the status and receive a warning. A key benefit of this system is you will know how to fix it before there are any problems.

There are many cases in availability systems where you have simple failover technologies: you take an error, you failover, you get to that resource, and then you find out the network or disk isn’t working because it wasn’t configured properly. By having this active validation capability and the report out, the status is being monitored in a simple and reliable fashion – you know when you’re redundant and how you’re going to manage failures.

Thanks to everyone that attended. For those that didn’t have the chance to attend or ask questions, please feel free to leave them in the comments section and we will do our best to answer them.

For those of you that may have forgot to put it on your calendars, Marathon and Citrix are holding a webinar today to showcase the benefits of virtualizing Microsoft Exchange servers. Event attendees will learn:

The webinar will begin promptly at 11:30 a.m. EDT, so if you haven’t yet registered you can do so here.

For those that can’t attend, we will be posting the Q&A following the event.

As we noted in our last post, Exchange High Availability has become increasingly important to businesses of all sizes. To help you get started, we’ve put together these five tips, which are easily-digestible pieces from our “Protecting Microsoft Exchange in Physical and Virtual Environments” white paper.

STEP ONE – PROTECT AGAINST SERVER FAILURES WITH QUALITY HARDWARE AND COMPONENT REDUNDANCY

Server core components include power supplies, fans, memory, CPUs and main logic boards. Purchasing robust, name brand servers, performing recommended preventative maintenance, and monitoring server errors for signs of future problems can all help reduce the chances of Exchange downtime due to catastrophic server failure.

Downtime caused by server component failures can be significantly reduced by adding redundancy at the component level. Examples are: redundant power and cooling, ECC memory, with the ability to correct single-bit memory errors, and combining Ethernet cards with RAID.

STEP TWO – GET RID OF STORAGE FAILURES WITH STORAGE DEVICE REDUNDANCY AND RAID

Storage protection relies on device redundancy combined with RAID storage algorithms to protect data access and data integrity from hardware failures. There are distinct issues for both local disk storage and for shared, network storage.

For local storage, it is quite easy to add extra disks configured with RAID protection. A second disk controller is also required if you want to protect against controller failures.

Access to shared storage relies on either a fibre channel or Ethernet storage network. To assure uninterrupted access to shared storage, these networks must be designed to eliminate all single points of failure. This requires redundancy of network paths, network switches, and network connections to each storage array.

STEP THREE – PREVENT NETWORK FAILURES WITH REDUNDANT NETWORK PATHS, SWITCHES AND ROUTERS

The network infrastructure itself must be fault-tolerant, consisting of redundant network paths, switches, routers and other network elements. Server connections can also be duplicated to eliminate failovers caused by the failure of a single server or network component. Take care to ensure that the physical network hardware does not share common components. For example, dual-ported network cards share common hardware logic, and a single card failure can disable both ports. Full redundancy requires either two separate adapters or the combination of a built-in network port along with a separate network adapter.

STEP FOUR – FORGET SITE FAILURES WITH DATA REPLICATION TO ANOTHER SITE

Site failures can range from an air conditioning failure or a leaking roof that affects a single building, a power failure that affects a limited local area, or a major hurricane that affects a large geographic area. Site disruptions can last anywhere from a few hours to days or even weeks.

There are two methods for dealing with Site Disasters. One method is to tightly couple redundant servers across high speed/low latency links, to provide zero data-loss and zero downtime. The other method is to loosely couple redundant servers over medium speed/higher latency/greater distance lines, to provide a disaster recovery (DR) capability where a remote server can be restarted with a copy of the application database, which only misses the last few updates. In the latter case, asynchronous data replication is used to keep a backup copy of the data.

Data replication is combined with error detection and failover tools to help get a disaster recovery site up and running in minutes or hours, rather than days.

STEP FIVE – CONSIDER VIRTUALIZING EXCHANGE FOR BETTER HIGH AVILABILITY

The latest server virtualization technologies, while not required for protecting Exchange, do offer some unique benefits that can make Exchange protection both easier and more effective. Virtualization makes it very easy to set up evaluation test and development environments without the need for additional, dedicated hardware. Virtualization also allows resources to be adjusted dynamically to accommodate growth or peak loads.

To help you make the business case for virtualization Exchange, we’re producing a live webinar with Citrix on November 11th: Virtualizing Exchange - The Cold, Hard Numbers on Why Citrix XenServer + everRun VM is the Best Platform. Register for the webinar here.

For most organizations, email is single-handedly the most important tool for accomplishing business objectives. Without access to email, companies are at an immediate disadvantage in today’s “I want it now” marketplace. For example, let’s look at the impact email downtime has on productivity: Assuming that your employees are 25% less productive when email is unavailable, and their annual salary is $60,000, then every hour of downtime for an organization of 500 people results in more than $7,200 in lost employee productivity. Can your organization bare a $7,200/hour loss? In today’s economy? Probably Definitely not.

Avoiding the aforementioned consequence is an option, but in order to do so you need to guarantee continuous availability for your organizations email server. According to Paul Rubens at ServerWatch, 2007 forecasts from Gartner revealed that Microsoft Exchange 2007 will own 70% of the email market share by 2010. Now, whether Microsoft will actually return those results, it’s still too early to tell. However, as more and more companies rely on Exchange servers to run business functions, all potential causes of unplanned downtime need to be identified and eliminated.

Over the next month, we will be providing you with some recommendations on how to improve Exchange high availability through planned and unplanned downtime – starting with a webinar on November 11 titled “Virtualizing Exchange – The Cold, Hard Numbers on Why Citrix XenServer and everRun VM is the Best Platform.” For this webinar, Jerry Melnick, Marathon CTO, and Matt Fairbanks, VP of Product Marketing for Citrix Virtualization and Management Division, will team up to discuss how the latest server virtualization technologies keep users continuously connected to Microsoft Exchange servers in the easiest and most effective manner. We encourage you to register online for the webinar if you haven’t already.

Is there anything in particular related to protecting your Exchange severs you would like us to address in the next few weeks? Leave us a comment below and we will be sure to put it on our radar.

Last week at VMworld we demonstrated our everRun VM Lockstep Option for Citrix XenServer 5. Despite the decrease in foot traffic on the show floor, the turnout was much higher than expected. High airline prices (or possibly just the Vegas night life :)) may have kept some people away, but we presume our high turnout was a result of the increase in innovative sessions and seminars.

For those of you who weren’t able to attend or were there but didn’t get an up-close look at our everRun VM Lockstep demo, Michael Keen (a.k.a. C1tr1xguru) shot this video of our CTO, Jerry Melnick, giving an in-depth demonstration of system-level fault tolerance for virtual environments. Thanks for stopping by Michael.

Our demonstration gave visitors an inside look at all three levels of availability:

1. XenServer HA: Level One: Failover High Availability standard with XenServer 5 Enterprise and Platinum Editions for failure detection and auto-restart and failover capabilities applications that cannot endure extended periods of downtime.

2. everRun VM: Level Two: Component-Level Fault Tolerance for business-critical applications, which require little or no downtime (such as ERP and CRM).

3. everRun VM Lockstep Option: Level Three: System-Level Fault Tolerance (available Q1 2009) for the most critical applications, which require zero downtime and zero data loss.

If you had a chance to attend the demonstration we would love to hear your feedback.

Virtually every company we talk to needs both disaster recovery solutions to recover their systems and data after a major disruption, and high availability to keep key applications always available. In my discussions with companies considering our everRun software, I’ve heard a lot of them say that they are confused by many vendors’ claims and counter-claims for DR and HA. One of the biggest sources of confusion is that some vendors with solid products for disaster recovery are trying to pass off their DR solutions as reliable HA solutions. If the feedback I’m getting is any indication, these DR solutions posing as HA solutions just don’t work.

It’s not hard to see why a DR solution doesn’t make a good HA solution. With a product that is good at DR, in most cases getting the data across to the other location is pretty straightforward. But when you try to use the same solution to get both the application and the data across to use it for HA, well that’s where it breaks down. Let’s look at why.

A good DR product is usually fairly easy to set up for data replication to another site. But setting up the same product to restart the whole thing, application and data, when a failover occurs is complex and prone to errors. To set it up, you have to script all the pieces to make it happen – fault detection, client redirection to the DR site, application reset, and the list goes on. No wonder we so often hear that scripted-DR-for-HA doesn’t work consistently – there are too many moving parts that have to managed and monitored. In addition, no matter how minor a failure is, failover to the remote site is required. Not every failure you face is a disaster; therefore each failure should not be treated as one. Based on these horror stories, we thought it was a good idea to put together this webinar, Breaking Through the Confusion about DR and HA. I hope to help you better understand when, how, and why DR is the best fit to meet your requirements, when to use an HA solution and how to combine the two for optimal protection.

Interested? You can register here.

As many of you may know, we will be attending virtualization.info’s Virtualization Congress 2008 in London, October 14-16. We highly recommend European IT executives attend the event to gain from vendors and peers lessons learned on planning, implementing, maintaining and maximizing virtualization investments.

Marathon CTO Jerry Melnick will be on hand at the event as a keynote speaker and will be discussing why the XenServer and everRun combination is so resilient. This won’t be the typical “marketing fluff” event you’re probably use to; instead presenters will be sharing real life case studies to illustrate how their products and services have helped deliver on the promises they’ve made to their customers. Additional keynote speakers of note include: virtualization.info founder, Alessandro Perilli, and Citrix CTO, Simon Crosby.

As a Gold Sponsor for the event, we have been given the privilege of providing our customers and business partners attending the event with a 25% discount for registration. To receive the discount simply visit the event registration page and enter the discount code: PartnersAtVC2008.

For those that have already signed up, Alessandro has made the event agenda available here. If you have any additional questions regarding our involvement in the Virtualization Congress or surrounding the event itself, don’t hesitate to contact us directly or leave a comment here on the blog. Hope to see you there!

Every year Windows IT Pro magazine talks with hundreds of vendors, attends dozens of product demos and reviews some of the best products out in the Windows market. All the products the Windows IT Pro staff has identified can help IT professionals do their jobs faster and more efficiently. This year we are pleased to announce that everRun VM has been chosen as a bronze winner in the virtualization category. Here’s what our CEO Gary Philips had to say:

“Given all of the innovative virtualization companies considered for this award, we are honored to be named a Windows IT Pro Editors’ Best Award winner in the virtualization category. This award is the tenth industry award we have received in the past year, a testament to the importance and value of what we are doing to help companies reduce costs and ensure the availability of their applications.”

Other winners in our category include Parallels Virtuozzo Containers (gold winner) and VMware ThinApp (silver winner).

At the beginning of July I posted asking our readers to vote for us for Fast Company Magazine’s Fast 50 Reader Favorites. Apparently quite a few people listened because we placed #1 on the list! Being nominated was honorable enough, nevermind topping the chart.

The companies nominated are all major innovators of business technology including: BlogHer, Mozilla, our partner Citrix, FedEx, etc.; so you can imagine the look on our faces when we saw where we placed on the list.

We’ve worked hard to achieve this recognition and are glad that our services aren’t going unrecognized by the community. Thanks to everyone that voted and to the team here at Marathon for making this possible.

Now we’re going to Disney World!!! (just kidding…VMworld’s more like it)

“When we describe everRun VM to customers and prospects, the common reaction is ‘it’s too good to be true’” – Steve Keilen, VP of Marketing for Marathon Technologies

Today we made a Single Host Trial Edition of everRun VM available for prospects to download and test out. The trial edition allows users to experience everRun VM benefits – automated setup, configuration and management, intuitive interface and reliable VM protection – all within a matter of minutes.

By experiencing the simple “Click to Protect” power of everRun VM customers can:
• See how easy it is to protect a virtual machine in two minutes or less
• Put the protected VM through failure scenarios (including network and disk failures)
• Use online migration to move a running protected VM to another XenServer host

If you or your organization is in the market for fault-tolerant, high availability virtual server software, we encourage you to download the everRun VM Single Host Trial Edition. It comes with everything you need to get started, including an evaluation copy of XenServer Enterprise Edition. Feel free to leave a comment or contact us with any questions you may have.